China China Wholesale Electrofusion Fittings Manufacturer Quotes – Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment – CHUANGRONG Manufacture and Factory

China Wholesale Electrofusion Fittings Manufacturer Quotes – Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment – CHUANGRONG

Short Description:

Send email to us Send email

Product Detail

Product Tags

Feedback (2)

Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for Hdpe Drainage Pipe, Ppr Welding Machine, Stub End Hdpe, We believe that in good quality more than quantity. Before export of the hair there is strict top quality control check during treatment as per international good quality standards.

China Wholesale Electrofusion Fittings Manufacturer Quotes – Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment – CHUANGRONG Detail:

Detail Information

Product Name:	PN16 SDR11 PE100 Electrofusion HDPE Fittings Reducer For Water Supply	Application:	Gas,Water,Oil Etc
Standard:	EN 12201-3:2011,EN 1555-3:2010	Material:	PE100 Virgin Raw Material
Specification:	2520mm~400315mm PE100 PN16 SDR11	Port:	China Main Port

Product Description

PN16 SDR11 PE100 Electrofusion HDPE Fittings Reducer for Water supply

Production Description of Electrofusion HDPE Reducer

-Electrofusion HDPE fittings are welded by electrofusion machine to connect HDPE pipes together: After electrofusion welding machine plug in electricity and turn on, The copper wire buried inserted in electric fuse HDPE fittings are heated and make HDPE melt, Which joint HDPE pipe and fittings well.

Adavantages of CHUANGRONG Electrofusion HDPE Fittings

1.Cost-effective

Highest cost performance

Compared with traditional steel pipes, it is light and easy for workers to install and repair

Low installation and maintenance costs

Easy loading and transportation

Suitable for non-excavation

2.Sustainability

CHUANGRONG HDPE pipeline system integrates its environmental responsibility into its daily business activities.

HDPE is a green environmental protection material, which can be recycled without causing pollution to the environment.

We work hard to conserve natural resources and constantly strive to optimize the environmental performance of our products and how they used.

3.Professional Solution

1) Accept customer OEM production, large quantity customization requirements.

2) Technical support:Professional engineers and senior, special engineers provide technical support:More than 80 Technique personnel,20 Middle class engineer,8 Senior Engineers.

3)More than 100 sets injection molding machine and the largest (300,000g)domestic injection molding machine; Over 20 units of automation robot, 8 sets automation Electrofusion fittings production system.

4)Various type(Elbow,Coupler,Tee,End Cap,Saddle,Ball Valve etc) and completed specification(Ranged from 20-630 Electrofusion type)

5)Annual production capacity up to 13000 tons(More than 10 million pieces or more)

4.Technical Support

The key factors of product quality are technical support and material selection

Installed successfully. Our strong and efficient teamwork provides customers with the best solution in a timely manner:

The sales team understands and understands the customer’s use and proposes suitable HDPE pipeline solutions and products. The production department coordinates the production plan to ensure the fastest delivery time. Engineers and technicians solve and provide technical product performance and technical support.

Production workshop & Equippments

Own over 100 sets of injection molding machine;

The largest(300,000g) domestic injection molding machine;

Over 20 units hautomation robot;

8 sets automation Electrofusion HDPE fittings production system.

Annual capacity of over 13000 tons which gives customers huge inventory support.

Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment

P₂:4.7 Pin(4.0 welded bySwitched adaptor) P_3:Printed Parameters P_4:Embedded copper wire

1)Fusion Pin of Electrofusion HDPE fittings

4.7mm Pin of Electrofusion HDPE fittings produced.

Besides switched adaptors for 4.0 Pin supplied to suit claw of 4.0 electrofusion machine.

2)Moulded-in welding parameters

Welding parameters as per EN1555 is printed on the fittings, Such as Products’ name,OD(mm),PE100, PN16 SDR11.

Bar code is also attached on the electrofusion fittings for scanning.

3)Element&Stops

To promote joint quality,all elements are coated with polyethylene before being moulded into the fitting body. All fittings have removable pipe stops.The stops ensure pipes cannot be inserted past the midpoint,but can be removed for use in,for example,repair situations.

4)High quality copper wire embed in the HDPE fittings which haveGood thermal conductivity.

Details of Electrofusion HDPE Reducer

Products name	Electrofusion HDPE Reducer
Sizes Available	As below specification sheet in detail
SDR	SDR11,SDR17
PN	PN16,PN10
Material Brand	SINOPEC, BASELL, SABIC, BOROUGE etc
Executive Standard	EN 12201-3:2011,EN 1555-3:2010
Colors Available	Black color , blue color, Orange or as request.
Packing Method	Normal export packing. by carton
Production Lead Time	Depending on the order quantity.Normally about 2~3 weeks for 20′ GP, 3~4 Weeks for a 40′GP.
Certificate	ISO, CE,BV,Factory Test Report
Supply Ability	100000 Ton/Year
Payment Method	T/T, L/C at sight
Trading Method	EXW, FOB, CFR, CIF,DDU

Specification of Electrofusion HDPE Reducer

Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment

specifications φD×φD1	L mm	A mm	B mm	φd mm
25×20	95	45	35	4.7
32×20	95	45	45	4.7
32×25	95	40	45	4.7
40×25	100	50	40	4.7
40×32	100	50	40	4.7
50×25	110	55	40	4.7
50×32	110	55	40	4.7
50×40	110	50	50	4.7
63×25	115	60	40	4.7
63×32	120	60	40	4.7
63×40	120	55	40	4.7
63×50	120	55	50	4.7
75×50	120	65	50	4.7
75×63	130	65	50	4.7
90×50	140	65	55	4.7
90×63	140	65	55	4.7
90×75	145	65	60	4.7
110×63	160	75	55	4.7
110×75	155	75	60	4.7
110×90	155	75	65	4.7
125×63	160	80	60	4.7
125×90	160	80	70	4.7
125×110	165	85	69	4.7
160×90	195	94	74	4.7
160×110	195	95	75	4.7
160×125	195	95	75	4.7
200×110	210	95	80	4.7
200×160	210	95	85	4.7
250×110	230	100	80	4.7
250×160	230	110	90	4.7
250×200	230	110	100	4.7
315×200	240	100	100	4.7
315×250	240	100	100	4.7
400×250	260	110	105	4.7
400×315	260	110	105	4.7

Applications of Electrofusion HDPE Fittings

1.Municipal water supply, gas supply and agriculture etc.2.Commercial & Residential water supply3.Industrial liquids transportation4.Sewage treatment5. Food and chemical industry7. Replacement of cement pipes and steel pipes8. Argillaceous silt, mud transportation9. Garden green pipe networks

Black PN16 SDR11 PE100 HDPE Electrofusion Reducer For Sewage Treatment

Certifications

We can supply ISO9001-2008, BV ,SGS, CE etc certification.All kinds of products are regularly conducted pressure-tight blasting test,longitudinal shrinkage rate test, quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products totally reach the relevant standards from raw materials to finished products.

width= width=