Welcome To CHUANGRONG

China Wholesale Electrofusion Machine Pricelist – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Polythene Water Pipe, 450mm Pe Pipe, Pp Compression Fittings, Welcome any inquiry to our firm. We will be happy to ascertain helpful business enterprise relationships along with you!
China Wholesale Electrofusion Machine Pricelist – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG Detail:

Detail Information

Eletrical Couplers Brands: Akatherm-Euro, Geberit,Valsir,Coes,Waviduo Outside Temperature Range: -5℃-40℃
Ambient Temperature Probe: Eletronic Protection Degree: IP 54
Product Name: Elektra-315 Port: China Main Port

Product Description

Elektra 315 electrical welding machine hdpe pipe jointing machine

 

ELEKTRA 315 is an universal electrofusion machine,suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE,PP,PP-R,couplings for 8 to 48 V).The Elektra 315 machine is made in compliance with international standard. Composed of:machine body and carring case,intuitive control panel an in built memory with 500 welding cycles,featuring the possiblity of transferring data to a Pc/Laptop and an laser scanner-barcode reading system that allows the automatic setting of the welding parameters.Report in PDF file.

 

Stand composition:

-Universal

-Laser scanner

-Pen Drive

-Manual scraper

On request:

-Software Ritmo Transger

-Adapter DB9M-USB

Technical Features

Working range 20-315mm:1/2″ IPS-10″ DIPS
Materials HDPE,PP,PP-R
Power supply 110/230V Sihgle Phase 50/60 Hz
Absorbed power 2600W
Max.output curent 100A
60% Duty Cycle output 60A
Memory capacity 500 report
Protection degree IP 54
Weight machine body ~16 kg (35.5lb)
Dimensions machine body 263×240×300mm;10.3″×9.4″×1.8″
Dimensions transport case 405×285×340mm; 16″×11.2″×13.4″
Languages 21
Suggested power generator for full welding range 5.5-6 kVA

Performing a weld

Language selection:

Keep pressed at the same time the buttons + and OK and switch the welding machine on.

Release the buttons and input the number correspondent to the desired language using the buttons +/- (00= ITALIAN, 01=ENGLISH, 02=SPANISH and 03=CHINESE).

Press the button STOP to exit.

Restart the machine in order to activate the new commands.

Before starting welding it is necessary to check general status of welder, welding cables and their terminals. In case they are damaged, it is necessary to substitute them. Electrical cable must be completely unwounded and connected to power outlet. After having pressed starting switch, on the lower part of welder, display will turn on and ambient temperature will appear in °C. We remind you that according to ambient temperature, if this is different from reference temperature ( 20 °C), operator will have to correct welding time as indicated by manufacturer of electrical coupler.

By pressing key + or  you will introduce value of welding time in seconds. When confirming value with key OK voltage value will appear ( U ) from a minimum of 8 V to be increased with key +.

By confirming value set with key OK welding cycle will start, while welding time is displayed and decreasing until reaching zero.

When welding is over an acoustic signal will start indicating end of procedure. If printer is connected to special connector, printing will start during which message “PRN” is displayed to indicate printing phase. If, on the contrary, printer is not connected or it is off a serie of hyphens alternating with “PRN” message is displayed.

By pressing a key you will be brought to initial datum, which is ambient temperature omitting the printing of the weld performed and loosing it permanently.

In case of anomalies during welding cycle, a numeric code from 1 to 20 is displayed. To each number correspond a specific cause of the alarm that has caused the interruption of the weld. If the printer is connected and on it will start printing code of the error, otherwise on display will be showed error code alternate to message “PRN”.

To reset error, press key STOP. Alarm is stopped and welder shows again ambient temperature.

COUPLER’S PREPARATION

FUSION BY BAR CODE READING

图片14


Product detail pictures:

China Wholesale Electrofusion Machine Pricelist –  315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG detail pictures

China Wholesale Electrofusion Machine Pricelist –  315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG detail pictures

China Wholesale Electrofusion Machine Pricelist –  315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG detail pictures

China Wholesale Electrofusion Machine Pricelist –  315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG detail pictures


Related Product Guide:

We have our own product sales staff, style crew, technical group, QC staff and package staff. We now have strict high quality management procedures for each approach. Also, all of our workers are experienced in printing subject for China Wholesale Electrofusion Machine Pricelist – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG , The product will supply to all over the world, such as: Argentina, Denmark, Philippines, Besides there are also professional production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable products quality, increase customers' satisfaction and achieve win-win situation .
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Gary from Bangladesh - 2017.03.08 14:45
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Samantha from Kyrgyzstan - 2018.06.03 10:17

    Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us