Welcome To CHUANGRONG
China Wholesale Hdpe Water Supply Pipes Quotes – High Density Polyethylene HDPE Pipe Polypipe for Drinking Water Supply – CHUANGRONG
China Wholesale Hdpe Water Supply Pipes Quotes – High Density Polyethylene HDPE Pipe Polypipe for Drinking Water Supply – CHUANGRONG Detail:
Basic Information
| Application: | Drinking Water Supply | Standard: | ISO4427/EN12201, DIN8074/8075 |
|---|---|---|---|
| Material: | 100% Virgin Material PE100 &PE80 | Specification: | DN20mm-1600mm |
| Product Name: | High Density Polyethylene HDPE Pipe Polypipe For Drinking Water Supply | Pipe Color: | Black With Blue Stripe |
Certificate:WRAS,ISO, CE,BV,SGS
Colors Available:Black color with blue strips, blue color, Orange or as request.
Packing Method:Normal export packing.
Pipe dia.20mm-63mm can be in coils with 50m/100m length,
Pipe dia. >63mm in bars with 5.8m/11.8m length
Production Lead Time:Depending on the order quantity.
Normally about 5 days for 20ft container, 10 days for a 40ft container.
Supply Ability:100000 Ton/Year
Payment Method:T/T, L/C at sight,West Union
Trading Method:EXW, FOB, CFR, CIF,DDU
Application of HDPE Pipe for Water Supply
Physical Properties
| No. | Item | Requirements | |
| 1 | Percentage of breaking-elongation,% | ≥350 | |
| 2 | Longitudinal reversion(110℃),% | ≤3 | |
| 3 | Oxidation induction time (200℃)min | ≥20 | |
| 4 | Weather resistance 1. (After the pipe has accepted the aging energy which equal to or more than 3.5GJ/m2) | 80℃ static hydraulic strength (165h) | No break, no leakage. |
| Percentage of breaking-elongation,% | ≥350 | ||
| Oxidation induction time (200℃)min | ≥10 | ||
| No | Items | HDPE Pipe |
| 1 | Molecular | ≥300 000 |
| 2 | Density | 0.960 g/cm3 |
| 3 | Tensile breaking strength | ≥28 Mpa |
| 4 | Longitudinal contraction rate of return | ≤3% |
| 5 | Breaking elongation | ≥500% |
| 6 | Resistant to corrosion | good |
| 7 | Tensile strength | ≥28Mpa |
| 8 | Static hydraulic strength | 1)20℃,cycle stress 12.4Mpa,100h,no break,no leakage |
| 2)80℃,cycle stress5.5Mpa,165h,no break,no leakage | ||
| 3)80℃,cycle stress5.0Mpa,1000h,no break,no leakage | ||
| 9 | MFR(190℃,5kg,)g/10min | ≤25% |
| 10 | Oxidation induction time (200℃)min | ≥20 |
Product Description
HDPE Pipes, Polyethylene (PE Pipe) are sorted by strength classified according to the intensity of the earlier technological
developments.
HDPE Pipe pressure classes that can be made between PN4-PN25 and the production of the desired diameter and size .
HDPE pipes system has undergone many tests. One of today’s most widely used pipe.
HDPE pipes systems which is economical, easy in handling, efficient performance, easy method of coupling,and quite useful.
Specification
| PE100 | 0.4MPa | 0.5MPa | 0.6MPa | 0.8MPa | 1.0MPa | 1.25MPa | 1.6MPa | 2.0MPa | 2.5MPa |
| Outside Diameter | PN4 | PN5 | PN6 | PN8 | PN10 | PN12.5 | PN16 | PN20 | PN25 |
| SDR41 | SDR33 | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 | SDR9 | SDR7.4 | |
| Wall Thickness (en) | |||||||||
| 20 | - | - | - | - | - | - | 2.0 | 2.3 | 3.0 |
| 25 | - | - | - | - | - | 2.0 | 2.3 | 3.0 | 3.5 |
| 32 | - | - | - | - | 2.0 | 2.4 | 3.0 | 3.6 | 4.4 |
| 40 | - | - | - | 2.0 | 2.4 | 3.0 | 3.7 | 4.5 | 5.5 |
| 50 | - | - | 2.0 | 2.4 | 3.0 | 3.7 | 4.6 | 5.6 | 6.9 |
| 63 | - | - | 2.5 | 3.0 | 3.8 | 4.7 | 5.8 | 7.1 | 8.6 |
| 75 | - | - | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 | 8.4 | 10.3 |
| 90 | - | - | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 | 12.3 |
| 110 | - | - | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 | 12.3 | 15.1 |
| 125 | - | - | 4.8 | 6.0 | 7.4 | 9.2 | 11.4 | 14.0 | 17.1 |
| 140 | - | - | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 | 15.7 | 19.2 |
| 160 | - | - | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 | 17.9 | 21.9 |
| 180 | - | - | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 | 20.1 | 24.6 |
| 200 | - | - | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 | 22.4 | 27.4 |
| 225 | - | - | 8.6 | 10.8 | 13.4 | 16.6 | 20.5 | 25.2 | 30.8 |
| 250 | - | - | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 | 27.9 | 34.2 |
| 280 | - | - | 10.7 | 13.4 | 16.6 | 20.6 | 25.4 | 31.3 | 38.3 |
| 315 | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 | 23.2 | 28.6 | 35.2 | 43.1 |
| 355 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | 32.2 | 39.7 | 48.5 |
| 400 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | 36.3 | 44.7 | 54.7 |
| 450 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | 40.9 | 50.3 | 61.5 |
| 500 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | 45.4 | 55.8 | - |
| 560 | 13.7 | 17.2 | 21.4 | 26.7 | 33.2 | 41.2 | 50.8 | 62.5 | - |
| 630 | 15.4 | 19.3 | 24.1 | 30.0 | 37.4 | 46.3 | 57.2 | 70.3 | - |
| 710 | 17.4 | 21.8 | 27.2 | 33.9 | 42.1 | 52.2 | 64.5 | 79.3 | - |
| 800 | 19.6 | 24.5 | 30.6 | 38.1 | 47.4 | 58.8 | 72.6 | 89.3 | - |
| 900 | 22.0 | 27.6 | 34.4 | 42.9 | 53.3 | 66.2 | 81.7 | - | - |
| 1000 | 24.5 | 30.6 | 38.2 | 47.7 | 59.3 | 72.5 | 90.2 | - | - |
| 1200 | 29.4 | 36.7 | 45.9 | 57.2 | 67.9 | 88.2 | - | - | - |
| 1400 | 34.3 | 42.9 | 53.5 | 66.7 | 82.4 | 102.9 | - | - | - |
| 1600 | 39.2 | 49.0 | 61.2 | 76.2 | 94.1 | 117.6 | - | - | - |
Application
HDPE pipes have been in existence sicne the mid 50’s . The experience shows tha HDPE pipes is solution to most pipe problems being recogized by clients and engineering consultants as the ideal pipe material for many pressure and non pressure applications from water and gas distrutionto gavity , sewers and surface water drainage for both new & rehabilitation projects.
Application field: Drinking water supply pipe for urban and rural area, liquid transmission pipe in chemical, chemical fiber,
food, forestry and metallurgy industry, waste water drainage pipe, mining slurry transmission pipe for mining field.
Connection Methods
Workshop
Material
| SI NO. | PROPERTIES | UNIT | REQUIREMENT | Experimental parameters | Experimental Method |
| 1 | Density | Kg/m³ | More than 930
(base resin) |
190℃,5KG | D method of GB/T1033-1986,experimental preparation is according to GB/T1845.1-1989 : 3.3.1 |
| 2 | Melt Flow Rate (MFR) | g/10min | 0.2-1.4,and the maximum deviation should not exceed the nominal value of the mix | 190℃,5kg | GB/T3682-2000
|
| 3 | Thermal stability (oxidation induction time) | min | More than 20 | 200℃ | GB/T17391-1998 |
| 4 | Volatile content | Mg/kg | Less than 350 | Appendix C | |
| 5 | Moisture content b | Mg/kg | Less than 300 | ASTMD4019:1994a | |
| 6 | Carbon black content c | % | 2.0-2.5 | GB/T13021-1991 | |
| 7 | Carbon black dispersion c | grade | Less than 3 | GB/T18251-2000 | |
| 8 | Pigment dispersion d | grade | Less than 3 | GB/T18251-2000 | |
| 9 | Resistant to gas components | h | More than 20 | 80℃,2Mpa
(ring stress) |
Appendix D |
|
Bear fast crack propagation (RCP) |
|||||
| 10 | Full size (FS) experiment :Dn ≥250mm
or S4 experiment:pipe wall thickness ≥15mm |
Mpa
Mpa |
Full size experiment’s critical pressure Pc.fs ≥ 1.5XMOP | 0℃
0℃ |
ISO13478:1997
GB/T19280-2003 |
| 11 | Bear slow crack propagation (En≥5mm) | h | 165 | 8℃,0.8Mpa
(experiment pressure) f
80℃,0.92Mpa (experiment pressure) g |
GB/T18476-2001 |
| a Non-black blends should meet the weatherability requirements in Table 6
b Water content is measured when the measured volatiles do not meet the requirements. When arbitration, the water content should be the measurement results as a basis for judging
c Only apply to black mix d Only apply to non-black mix
e If the S4 test results do not meet the requirements, you can follow the full-size experiment to re-experiment to full-size experimental results as the final basis.
f PE80, SDR11 experimental parameters g PE100, SDR11 experimental parameters
|
|||||
Production and Delivery of HDPE pipe
Own100sets of advanced pipe production lines at domestic and abroad.
Laboratory and Factory Inspection-Hydrostatic test
Certifications
We can supply ISO9001-2008,WRAS, BV ,SGS, CE etc certification. All kinds of products are regularly conducted pressure-tight blasting test,longitudinal shrinkage rate test, quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products totally reach the relevant standards from raw materials to finished products.
Product detail pictures:
Related Product Guide:
Our advantages are lessen charges,dynamic income team,specialized QC,sturdy factories,premium quality services for China Wholesale Hdpe Water Supply Pipes Quotes – High Density Polyethylene HDPE Pipe Polypipe for Drinking Water Supply – CHUANGRONG , The product will supply to all over the world, such as: Russia, Zambia, Seychelles, It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we will be happy to serve you.
By Judy from Belgium - 2018.09.19 18:37
We have been looking for a professional and responsible supplier, and now we find it.
By Alma from Amman - 2018.08.12 12:27
Send your message to us:
contact us
- phone number 0086-19381607486
-
address
Room13, 15/F ,Building1, Nine miles square, No.39 , Jiancai road, Chengdu, China.
- address chuangrong@cdchuangrong.com
understand
Hot Products - Sitemap - AMP Mobile
Repair Clamp, Male Adaptor, Pe Water Pipe, Hdpe Pipe Fitting, Hdpe Pipe Fittings, Hdpe Pipe And Fitting,
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Top
