China China Wholesale Polythene Water pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG Manufacture and Factory

China Wholesale Polythene Water pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG

Short Description:

Send email to us Send email

Product Detail

Product Tags

Feedback (2)

Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value "unification, determination, tolerance" for Hdpe Fittings Supplier, Hdpe Male Adaptor, Hdpe Connectors, Welcome all prospects of residence and abroad to visit our organization, to forge a outstanding potential by our cooperation.

China Wholesale Polythene Water pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG Detail:

Detail Information

roduct Name:	100mm 89mm PE100 High Density Polyethylene Pipe For Cable Or Electricity Wire	Application:	For Cable Or Elctricity Wire
Material:	100% Virgin Material PE100	Specification:	DN63mm DN200mm DN315 PN16 SDR11
Pipe Color:	Black With Orange Stripe	Pressure:	PN6 PN8 PN10

Product Description

CHUANGRONG HDPE pipe For Cable or Electricity Wire are black corlor with orange or blue strip, Which depends on requirement of end user.

MPP (modified polypropylene) pipe for electrical communication cable protection is manufactured as the new type of plastic pipe adopting modified polypropylene as the main raw material and using a special formula and processing technology,with good features of high strength,temperature resistance,handling easily,convenient installation and cost saving.The modified polypropylene trenchless pipe is widely used as the protection pipe of electrical communication cable. Its characteristics is more obvious as a towing pipe. It conforms to the development requirements of modern cities and is suitable for buried depth of 2~18m.

Physical properties index:

Item	Index
Density (g/cm3)	0.90-0.94
Ring Stiffness(3%,Normal Tem,Kpa)	SN24 ≥24 SN32 ≥32 SN40 ≥40
Flattening Test (50%)	No break,no crack.
Hammer Impact	No break,no crack.
Vicat Soften Temperature ( ℃)	≥150
Tensile Strength (%)	Pipe:≥25 ; Fusion Joint: ≥22.5
Elongation at Break (%)	≥400
Flexural Strength (Mpa)	≥36

Specification

E straight tube series	Nominal outer diameter	Wall thickness	Ring stiffness	Material	Package length
	48.3mm	2.2mm	≤10 level	HDPE	6 m / root
	48.3mm	2.5mm	≥10 level	HDPE	6 m / root
	48.3mm	3.0mm	≥10level	HDPE	6 m / root
	48.3mm	4.0mm	≥15 level	HDPE	6 m / root
	60.3mm	2.2mm	≤10level	HDPE	6 m / root
	60.3mm	2.5mm	≤10level	HDPE	6 m / root
	60.3mm	3.0mm	≥10level	HDPE	6 m / root
	75mm	2.2mm	≤10level	HDPE	6 m / root
	75mm	2.8mm	≤10level	HDPE	6 m / root
	75mm	4.0mm	≥15 level	HDPE	6 m / root
	75mm	5.0mm	≥15 level	HDPE	6 m / root
	89mm	2.8mm	≤10level	HDPE	6 m / root
	89mm	3.5mm	≥10level	HDPE	6 m / root
	100mm	2.8mm	≤10level	HDPE	6 m / root
	100mm	3.2mm	≤10level	HDPE	6 m / root
	100mm	3.5mm	≥10level	HDPE	6 m / root
	100mm	4.0mm	≥15 level	HDPE	6 m / root
	110mm	2.8mm	≤10level	HDPE	6 m / root
	110mm	3.2mm	≤10level	HDPE	6 m / root
	110mm	3.5mm	≥10level	HDPE	6 m / root
	110mm	4.0mm	≥15 level	HDPE	6 m / root
	160mm	5.0mm	≥10level	HDPE	6 m / root
	160mm	6.0mm	≥15 level	HDPE	6 m / root
	160mm	7.0mm	≥15 level	HDPE	6 m / root

MPP PIPE:

Outside diameter(mm)	Thickness(mm)			Length(mm)
	Ring stiffness (3% ) Normal temperature
	SN24	SN32	SN40
110	6	8	10	6000
160	10	12	14	6000
180	12	14	16	9000
200	14	16	18	9000
225	16	18	20	12000
250	18	20	22	12000

1. M-PP pipe has excellent electrical insulation.

2. M-PP pipe has higher thermal deformation temperature and low temperature impact performance.

3. M-PP pipe has higher tensile and compression resistance than HDPE.

4, M-PP pipe is light, smooth, frictional resistance is small, can be hot-melt butt joint.

5, M-PP tube long-term use temperature-5 ~ 70 ℃.

6. Construction instructions It is strictly forbidden to drop, hit, scratch, or expose to the sun during the transportation and construction of pipes.

The axis of the two pipes must be aligned during the hot-melt butt joint, and the end face cutting should be vertical and flat.

The processing temperature, time, pressure, and climate conditions are adjusted accordingly. The minimum bending radius of the pipe should be ≥75 pipe outer diameter.

Application

Technology of trenchless is widely used based on its good advantages of non pollution of environment, not affect traffic, little
damage to stratigraphic texture,no need of soil transportation and pilling,cost-effective and remarkable social and economic
benefits.This kind of trenchless technology not only ensures the reliability of the network and reduces the failure rate, but also
makes the environment of the city greatly improved.There is no need to dig up and destroy the road surface largely.It is very
suitable for laying pipelines, cables and other construction works in special areas such as roads, railways, buildings and under
river etc.

20191121134626_32182