Product Name: | PP Elbow | Material: | Polypropylene |
---|---|---|---|
Technics: | Injection Molding | Size: | 20mm-110mm |
Color: | Blue,black Or As Requirement | Standard: | DIN 8076-3,ISO 14236, ISO13460 |
Polypropylene ElbowOperate Temperature
Due to the restrictions on the use of polyethylene pipes, refer to the regulations of the country of use.
The maximum operating temperature refers to the operating temperature of the polyethylene pipe, and the PP ELBOW can withstand temperatures below 0 ° C. The table below shows the maximum working pressure for continuous operation and temperature change.
Operating T[℃] | 20℃ | 25℃ | 30℃ | 35℃ | 40℃ | 45℃ |
PFA[bar] | 16 | 14.9 | 13.9 | 12.8 | 11.8 | 10.8 |
PFA[bar] | 10 | 9.3 | 8.7 | 8 | 7.4 | 6.7 |
<div>
<div id=”>
Plastic PN16 Water Pipe Tube Joint Polypropylene Elbow Fitting
The compression fitting production line is designed to connect polyethylene pipes with an outer diameter of 20-110mm under high pressure to transport fluids. It is fully compatible with all PE80 and PE100 pipes complying with EN ISO 4427, ISO 14236, DIN8074, and pressures up to 16 bar.
D | DN | PN | CTN |
20 | 15 | 16 | 150 |
25 | 20 | 16 | 88 |
32 | 25 | 16 | 52 |
40 | 32 | 16 | 26 |
50 | 40 | 16 | 15 |
63 | 50 | 16 | 11 |
75 | 65 | 10 | 6 |
90 | 80 | 10 | 4 |
110 | 100 | 10 | 4 |
Universal pressure up to 16 bar, it is resistant to various chemical substances and UV rays. Can be used for PE pipe system and any existing pipe connection materials.