Welcome To CHUANGRONG
China Wholesale Water Pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG
China Wholesale Water Pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG Detail:
Detail Information
| roduct Name: | 100mm 89mm PE100 High Density Polyethylene Pipe For Cable Or Electricity Wire | Application: | For Cable Or Elctricity Wire |
|---|---|---|---|
| Material: | 100% Virgin Material PE100 | Specification: | DN63mm DN200mm DN315 PN16 SDR11 |
| Pipe Color: | Black With Orange Stripe | Pressure: | PN6 PN8 PN10 |
Product Description
CHUANGRONG HDPE pipe For Cable or Electricity Wire are black corlor with orange or blue strip, Which depends on requirement of end user.
MPP (modified polypropylene) pipe for electrical communication cable protection is manufactured as the new type of plastic pipe adopting modified polypropylene as the main raw material and using a special formula and processing technology,with good features of high strength,temperature resistance,handling easily,convenient installation and cost saving.The modified polypropylene trenchless pipe is widely used as the protection pipe of electrical communication cable. Its characteristics is more obvious as a towing pipe. It conforms to the development requirements of modern cities and is suitable for buried depth of 2~18m.
Physical properties index:
| Item | Index |
| Density (g/cm3) | 0.90-0.94 |
| Ring Stiffness(3%,Normal Tem,Kpa) |
SN24 ≥24 SN32 ≥32 SN40 ≥40 |
| Flattening Test (50%) | No break,no crack. |
| Hammer Impact | No break,no crack. |
| Vicat Soften Temperature ( ℃) | ≥150 |
| Tensile Strength (%) | Pipe:≥25 ; Fusion Joint: ≥22.5 |
| Elongation at Break (%) | ≥400 |
| Flexural Strength (Mpa) | ≥36 |
Specification
| E straight tube series | Nominal outer diameter | Wall thickness | Ring stiffness | Material | Package length |
| 48.3mm | 2.2mm | ≤10 level | HDPE | 6 m / root | |
| 48.3mm | 2.5mm | ≥10 level | HDPE | 6 m / root | |
| 48.3mm | 3.0mm | ≥10level | HDPE | 6 m / root | |
| 48.3mm | 4.0mm | ≥15 level | HDPE | 6 m / root | |
| 60.3mm | 2.2mm | ≤10level | HDPE | 6 m / root | |
| 60.3mm | 2.5mm | ≤10level | HDPE | 6 m / root | |
| 60.3mm | 3.0mm | ≥10level | HDPE | 6 m / root | |
| 75mm | 2.2mm | ≤10level | HDPE | 6 m / root | |
| 75mm | 2.8mm | ≤10level | HDPE | 6 m / root | |
| 75mm | 4.0mm | ≥15 level | HDPE | 6 m / root | |
| 75mm | 5.0mm | ≥15 level | HDPE | 6 m / root | |
| 89mm | 2.8mm | ≤10level | HDPE | 6 m / root | |
| 89mm | 3.5mm | ≥10level | HDPE | 6 m / root | |
| 100mm | 2.8mm | ≤10level | HDPE | 6 m / root | |
| 100mm | 3.2mm | ≤10level | HDPE | 6 m / root | |
| 100mm | 3.5mm | ≥10level | HDPE | 6 m / root | |
| 100mm | 4.0mm | ≥15 level | HDPE | 6 m / root | |
| 110mm | 2.8mm | ≤10level | HDPE | 6 m / root | |
| 110mm | 3.2mm | ≤10level | HDPE | 6 m / root | |
| 110mm | 3.5mm | ≥10level | HDPE | 6 m / root | |
| 110mm | 4.0mm | ≥15 level | HDPE | 6 m / root | |
| 160mm | 5.0mm | ≥10level | HDPE | 6 m / root | |
| 160mm | 6.0mm | ≥15 level | HDPE | 6 m / root | |
| 160mm | 7.0mm | ≥15 level | HDPE | 6 m / root |
MPP PIPE:
| Outside diameter(mm) | Thickness(mm) | Length(mm) | ||
| Ring stiffness (3% ) Normal temperature | ||||
| SN24 | SN32 | SN40 | ||
| 110 | 6 | 8 | 10 | 6000 |
| 160 | 10 | 12 | 14 | |
| 180 | 12 | 14 | 16 | 9000 |
| 200 | 14 | 16 | 18 | |
| 225 | 16 | 18 | 20 | 12000 |
| 250 | 18 | 20 | 22 | |
1. M-PP pipe has excellent electrical insulation.
2. M-PP pipe has higher thermal deformation temperature and low temperature impact performance.
3. M-PP pipe has higher tensile and compression resistance than HDPE.
4, M-PP pipe is light, smooth, frictional resistance is small, can be hot-melt butt joint.
5, M-PP tube long-term use temperature-5 ~ 70 ℃.
6. Construction instructions It is strictly forbidden to drop, hit, scratch, or expose to the sun during the transportation and construction of pipes.
The axis of the two pipes must be aligned during the hot-melt butt joint, and the end face cutting should be vertical and flat.
The processing temperature, time, pressure, and climate conditions are adjusted accordingly. The minimum bending radius of the pipe should be ≥75 pipe outer diameter.
Application
Technology of trenchless is widely used based on its good advantages of non pollution of environment, not affect traffic, little
damage to stratigraphic texture,no need of soil transportation and pilling,cost-effective and remarkable social and economic
benefits.This kind of trenchless technology not only ensures the reliability of the network and reduces the failure rate, but also
makes the environment of the city greatly improved.There is no need to dig up and destroy the road surface largely.It is very
suitable for laying pipelines, cables and other construction works in special areas such as roads, railways, buildings and under
river etc.
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for China Wholesale Water Pipe Manufacturers – 89mm100mm HDPE High Density Polyethylene Pipe Mpp pipe For Cable / Electricity Wire – CHUANGRONG , The product will supply to all over the world, such as: Iraq, Costa rica, Rotterdam, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We've been able to also provide you with no cost samples to meet your needs. Best efforts are going to be produced to supply you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our items and enterprise. lot more, you'll be able to come to our factory to find out it. We'll constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. You should really feel absolutely free to make contact with us for small business and we believe we'll share the top trading practical experience with all our merchants.
By Myrna from Stuttgart - 2018.03.03 13:09
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Matthew from Romania - 2018.06.21 17:11
Send your message to us:
Products categories
Social Links
information
Quick Links
contact us
-
ADD:
Room 911, Building T1, The Ring Center, No.333 Dongda Road, Chengdu, China.
- TEL: 0086-18180897627
- EMAIL: chuangrong@cdchuangrong.com
Hot Products - Sitemap - AMP Mobile
Hdpe Pipe And Fitting, Repair Clamp, Hdpe Pipe Fittings, Hdpe Pipe Fitting, Pe Water Pipe, Male Adaptor,
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Top
