China China Wholesale Welding Machine Hdpe Manufacturers – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG Manufacture and Factory

China Wholesale Welding Machine Hdpe Manufacturers – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG

Short Description:

Send email to us Send email

Product Detail

Product Tags

Feedback (2)

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Hdpe Compression Fitting, Repair Clamp, Water Pipe Leak Repair, Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

China Wholesale Welding Machine Hdpe Manufacturers – 315 pipe Electrical Welding Machine , HDPE Pipe Jointing Machine – CHUANGRONG Detail:

Detail Information

Eletrical Couplers Brands:	Akatherm-Euro, Geberit,Valsir,Coes,Waviduo	Outside Temperature Range:	-5℃-40℃
Ambient Temperature Probe:	Eletronic	Protection Degree:	IP 54
Product Name:	Elektra-315	Port:	China Main Port

Product Description

Elektra 315 electrical welding machine hdpe pipe jointing machine

ELEKTRA 315 is an universal electrofusion machine,suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE,PP,PP-R,couplings for 8 to 48 V).The Elektra 315 machine is made in compliance with international standard. Composed of:machine body and carring case,intuitive control panel an in built memory with 500 welding cycles,featuring the possiblity of transferring data to a Pc/Laptop and an laser scanner-barcode reading system that allows the automatic setting of the welding parameters.Report in PDF file.

Stand composition:

-Universal

-Laser scanner

-Pen Drive

-Manual scraper

On request:

-Software Ritmo Transger

-Adapter DB9M-USB

Technical Features

Working range	20-315mm:1/2″ IPS-10″ DIPS
Materials	HDPE,PP,PP-R
Power supply	110/230V Sihgle Phase 50/60 Hz
Absorbed power	2600W
Max.output curent	100A
60% Duty Cycle output	60A
Memory capacity	500 report
Protection degree	IP 54
Weight machine body	~16 kg (35.5lb)
Dimensions machine body	263×240×300mm;10.3″×9.4″×1.8″
Dimensions transport case	405×285×340mm; 16″×11.2″×13.4″
Languages	21
Suggested power generator for full welding range	5.5-6 kVA

Performing a weld

Language selection:

Keep pressed at the same time the buttons + and OK and switch the welding machine on.

Release the buttons and input the number correspondent to the desired language using the buttons +/- (00= ITALIAN, 01=ENGLISH, 02=SPANISH and 03=CHINESE).

Press the button STOP to exit.

Restart the machine in order to activate the new commands.

Before starting welding it is necessary to check general status of welder, welding cables and their terminals. In case they are damaged, it is necessary to substitute them. Electrical cable must be completely unwounded and connected to power outlet. After having pressed starting switch, on the lower part of welder, display will turn on and ambient temperature will appear in °C. We remind you that according to ambient temperature, if this is different from reference temperature ( 20 °C), operator will have to correct welding time as indicated by manufacturer of electrical coupler.

By pressing key + or – you will introduce value of welding time in seconds. When confirming value with key OK voltage value will appear ( U ) from a minimum of 8 V to be increased with key +.

By confirming value set with key OK welding cycle will start, while welding time is displayed and decreasing until reaching zero.

When welding is over an acoustic signal will start indicating end of procedure. If printer is connected to special connector, printing will start during which message “PRN” is displayed to indicate printing phase. If, on the contrary, printer is not connected or it is off a serie of hyphens alternating with “PRN” message is displayed.

By pressing a key you will be brought to initial datum, which is ambient temperature omitting the printing of the weld performed and loosing it permanently.

In case of anomalies during welding cycle, a numeric code from 1 to 20 is displayed. To each number correspond a specific cause of the alarm that has caused the interruption of the weld. If the printer is connected and on it will start printing code of the error, otherwise on display will be showed error code alternate to message “PRN”.

To reset error, press key STOP. Alarm is stopped and welder shows again ambient temperature.