slide show 1

HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved

Get A Free Quote

Detail Information
 
Product Name: HDPE Ball Valve For Gas Supply PN16 SDR11 PE100 CE Approved Application: Gas,Water,Oil Etc
Specification: 50mm~315mm PE100 PN16 SDR11 Standard: EN 1555-3:2010 EN 12201-3:2011
Port: China Main Port Material: PE100 Virgin Raw Material

 

Product Description
HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved
 

Product Description of Standard HDPE Ball Valve for GAS Supply

Electrofusion HDPE fittings are welded by electrofusion machine to connect HDPE pipes together: After electrofusion welding machine plug in electricity and turn on, The copper wire buried inserted in electric fuse HDPE fittings are heated and make HDPE melt, Which joint HDPE pipe and fittings well.

 

Advantages of CHUANGRONG Electrofusion HDPE Fittings

CHUANGRONG's PE (polyethylene) pipeline system meets and exceeds international and European standards, and provides customers with the most cost-effective solutions with reliable quality and reasonable prices:HDPE products have been exported to more than 60 countries around the world, and have been satisfied with customers. The service life is at least 50 years. Not just Reliable in any case, but they also contribute to the sustainable development of the world. One of the lowest carbon footprints compared to metal or other plastic systems.

Production workshop & Equippments

Own over 100 sets of injection molding machine;

The largest(300,000g) domestic injection molding machine;

Over 20 units hautomation robot;

8 sets automation Electrofusion HDPE fittings production system.

Annual capacity of over 13000 tons which gives customers huge inventory support

P2:4.7 Pin(4.0 welded by Switched adaptor)      P3:Printed Parameters       P4:Embedded copper wire
      

1)Fusion Pin of Electrofusion HDPE fittings

4.7mm Pin of Electrofusion HDPE fittings produced.

Besides switched adaptors for 4.0 Pin supplied to suit claw of 4.0 electrofusion machine.

 

2)Moulded-in welding parameters

Welding parameters as per EN1555 is printed on the fittings, Such as Products' name,OD(mm),PE100, PN16 SDR11.

Bar code is also attached on the electrofusion fittings for scanning.

 

3)Element&Stops

To promote joint quality,all elements are coated with polyethylene before being moulded into the fitting body.

All fittings have removable pipe stops.The stops ensure pipes cannot be inserted past the midpoint,but can be removed for use in,for example,repair situations.

 

4)High quality copper wire embed in the HDPE fittings which have Good thermal conductivity.

 

Details of Electrofusion HDPE Standard Ball Valve

Products name

Electrofusion HDPE Standard Ball Valve

Sizes Available

As below specification sheet in detail

SDR

SDR11

PN

PN16

Material Brand

SINOPEC, BASELL, SABIC, BOROUGE etc

Executive Standard

EN 1555-3:2010

Colors Available

Black color or as request.

Packing Method

Normal export packing. by carton

Production Lead Time

Depending on the order quantity.
Normally about 2~3 weeks for 20' GP, 3~4 Weeks for a 40'GP.

Certificate

ISO, CE,BV,Factory Test Report

Supply Ability

100000 Ton/Year

Payment Method

T/T, L/C at sight

Trading Method

EXW, FOB, CFR, CIF,DDU

 

Specification of Electrofusion HDPE Standard Ball Valve         

HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved                            HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved

 

Specifications

φdn

 

L

mm

A

mm

H

mm

φd
50 495 90 200 41
63 505 100 200 49
90 660 110 325 70
110 660 115 325 87
160 770 115 420 126
200 785 125 430 158
250 980 140 585 204
315 985 140 585 250

 

Specification of Electrofusion HDPE Two-Purge Ball Valve

HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved                               HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved

Specifications

φdn

 

L

mm

A

mm

B

mm

C

mm

H

mm

φd
90 660 110 330 590 835 70
110 680 115 330 590 830 87
160 760 115 415 590 800 126
200 780 125 435 600 935 158
250 980 140 585 700 1210 204
315 985 140 585 700 1245 250

 

Specification of Electrofusion HDPE One-Purge Ball Valve

HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved                                HDPE Electrofusion Standard HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved

Specifications

φdn

 

L

mm

A

mm

B

mm

C

mm

H

mm

φd
90 660 110 330 590 835 70
110 680 115 330 590 830 87
160 760 115 415 590 800 126
200 780 125 435 600 935 158
250 980 140 585 700 1210 204
315 985 140 585 700 1245 250

 

Applications of Electrofusion HDPE Fittings

1.Municipal water supply, gas supply and agriculture etc.
2.Commercial & Residential water supply
3.Industrial liquids transportation
4.Sewage treatment
5. Food and chemical industry
7. Replacement of cement pipes and steel pipes
8. Argillaceous silt, mud transportation
9. Garden green pipe networks.

 

Inspection Equipment

Finished products get well inspection before delivery.

 

Factory Test report

Test item Standard Conditions Results Unit
1.Melt Flow Index ISO1133 190°C & 5.0Kg 0.2-0.7 0.49 g/10min
2.Density ISO1183 @23°C ≥0.95 0.960 g/cm3
3.Oxidation Induction Time ISO11357 210°C >20 39 Min
4. Hydrostatic Pressure Test ISO1167 80°C 165h, 5.4Mpa Passed  
5 Size Check ISO3126 23°C Passed  
6 Appearance Clean& Smooth 23°C Passed  
  • The results according to test 1-3 are taken form the PE raw material supplier’s report.
  • The results according to test 4-6 are taken from the internal test results of fittings sampled from the
  • same batch as delivered fittings.
  • Marking according EN 12201 – 3 and EN 1555 – 3.
  • The pass/fail criteria are based on the requirements of the UNI EN 12201 and UNI EN 1555 standards.

Certifications

We can supply ISO9001-2008, BV ,SGS, CE etc certification.
All kinds of products are regularly conducted pressure-tight blasting test,longitudinal shrinkage rate test, quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products totally reach the relevant standards from raw materials to finished products.

 

Basic Information
Place of Origin: Sichuan, China
Brand Name: CR
Certification: ISO9001-2008, CE,BV,SGS,Factory test
Model Number: 50mm~315mm
Minimum Order Quantity: 1 - 499 Pieces
Price: $34.92~$1070.93/PCS
Packaging Details: Carton
Delivery Time: 40GP during 3~4 weeks or as required
Payment Terms: L/C, T/T, Western Union
Supply Ability: 100000 Ton/Tons per Year

CONTACT US